Chapter 3: Using Your Product
VSP 5360 User Manual
28
on program output.
3.4.3 Preset
After setting, the layers on the preview output, we do not need to switching to the program
output. Push the [Save] button, the button light is on, and some of the buttons 0~12 in PRE area
are on, and some flash. The buttons on can be saved, and flash will be overwrite. Select the
location that need to save , for example, button 1, OLED shows as follows.
3.4.4 Load
User can load the saved settings by pushing the [Load] button. For example, push button 1, the
SAVE 1 will display on preview monitor, then touch [TAKE] button to switch it to the program
display after confirmation.
SAVE TO USER CONFIG MODE 1
SAVE IS SUCCESSFUL
