1.
Brief Introduction
Terms and Definitions
VSP 516S User Manual 23
feature causes the switcher to wait until the vertical interval to switch.
This avoids a glitch (temporary scrambling) which normally is seen
when switching between sources.
“SMPTE”:
Society of Motion Picture and Television Engineers. A global
organization, based in the United States that sets standards for base
band visual communications. This includes film as well as video and
television standards.
“S-Video”:
A composite video signal separated into the luma (―Y‖ is for
luma, or black and white i
nformation; brightness) and the chroma (―C‖
is an abbreviation for chroma, or color information).
“Sync”:
Synchronization. In video, sync is a means of controlling the
timing of an event with respect to other events. This is accomplished
with timing pulses to insure that each step in a process occurs at the
correct time. For example, horizontal sync determines exactly when to
begin each horizontal scan line. Vertical sync determines when the
image is to be refreshed to start a new field or frame. There are many
other types of sync in video system. (Also known as ―sync signal‖ or
―sync pulse.‖)
“TCP/IP”:
Transmission Control Protocol/Internet Protocol. The
communication protocol of the Internet. Computers and devices with
direct access to the Internet are provided with a copy of the TCP/IP
program to allow them to send and receive information in an
understandable form.
“USB”:
Universal Serial Bus. USB was developed by seven PC and
telecom industry leaders (Compaq, DEC, IBM, Intel, Microsoft, NEC,
and Northern Telecom). The goal was easy plug-and-play expansion
outside the box, requiring no additional circuit cards. Up to 127
external computer devices may be added through a USB hub, which
may be conveniently located in a keyboard or monitor. USB devices
can be attached or detached without removing computer power. The
number of devices being designed for USB continues to grow, from
keyboards, mice, and printers to scanners, digital cameras, and ZIP
drives.
“VESA”:
Video Electronics Standards Association. A nonprofit number
organization dedicated to facilitating and promoting personal computer
graphics through improved standards for the benefit of the end-user.
www.vesa.org
“VGA”:
Video Graphics Array. Introduced by IBM in 1987, VGA is an
analog signal with TTL level separate horizontal and vertical sync. The
video outputs to a 15-pin HD connector and has a horizontal scan
frequency of 31.5 kHz and vertical frequency of 70 Hz (Mode 1, 2) and
60 Hz (Mode 3). The signal is non-interlaced in modes 1, 2, and 3 and
interlaced when using the 8514/A card (35.5 kHz, 86 Hz) in mode 4. It
Summary of Contents for VSP 516S
Page 1: ...VSP 516S User Manual 1 VSP 516S User Manual Manual RGB RD UM V516S E001 Revision V1 3...
Page 46: ...4 Menu Orientation MENU VSP 516S User Manual 46...
Page 120: ...6 System Setup and Operation How to Achieve Multiple Cascade VSP 516S User Manual 120...
Page 137: ...VSP 516S User Manual 137 Figure 3...