RGBlink VSP 516S, User Manual

Page: 104 / 138

6.
System Setup and Operation
How to Choose the Signal Source in PIP
VSP 516S User Manual 104
How to Choose the Signal Source in PIP
1. Press I/II button
，
the key lighting
，
enter PIP mode
，
LCD display as
：
2. Choose the input source of main channel, directly press
CV1,CV2,CV3,SVID,DVI,YPbPr,VGA,SDI are chosen as the main
channel
，
for example choose the CV2:
3. Press AB button
，
the key lighting
，
choose the sub-image signal source
，
press the CV1,CV2,CV3,SVID,DVI,YPbPr,VGA,SDI directly as the
sub-main channel for example DVI
4. Press AB button
，
the KEY light off
，
can re-choose the main signal:
Note
Main screen and Sprite can choose the same
input signal source, namely the master
screen can show the same picture.
>PIP ON
>SWAP IMAGE OFF
INPUT CV2
800X600X60
SELECT IMAGE B
INPUT DVI
1024X768X60
SELECT IMAGE A