RGBlink VSP 516S, User Manual

Page: 111 / 138

6.
System Setup and Operation
How to Set Up the Volume
VSP 516S User Manual 111
How to Set Up the Volume
1. Under single image mode, can be directly through the following steps:
2. Press MUTE button
，
Mute function open, the current audio is mute,
LCD:
Press MUTE button again
，
Mute function closed, remove the current was
mute audio.
3. User can choose UP/DOWN button
，
adjust VOLOMU value
，
to change
the size of the audio volume value, such as can turn it down to 20:
Note
Same as MENU AUDIO MUTE ON/OFF
Note
The
【
+
】
or
【
-
】
button can also adjust the value
4. Under the PIP mode, first of all should choose audio input source for
IMAGE A main input or IMAGE B sub- input source, and the specific
steps are as follows:
MENU AUDIO AUDIO IN choose IMAGE A or IMAGE B
input source
，
finish it. Other settings and single screen mode is
consistent, repeat the steps can be 1 to 3.
Note
The
【
MSA
】
button can also switch the audio
channel
>MUTE ON
VOLUME 30
>MUTE OFF
VOLUME 30
>MUTE OFF
VOLUME 20
>AUDIO IMAGE A
HDMI INTERNAL