350-12245-01 – updated December, 2019
QuadView UHDx/UHDx KVM User Guide
41
C H A P T E R 4
C o m m a n d L i n e C o n t r o l
RG B
This chapter describes all the features and functions available via the simple text-based QuadView
UHDx command-line interface protocol, which accepts requests from control devices and provides
responses to those devices. Control messages can be sent via Telnet or serial link between the
QuadView UHDx and an automation/control system or a PC running terminal emulation software.
To initiate a Telnet session with the QuadView UHDx via Telnet using Tera Term:
1.
Verify that both the QuadView UHDx and automated control system or PC are connected to
.
2.
Launch Tera Term.
3.
Select
Telnet
, and then enter the IP address of the QuadView UHDx.
If you do not know the QuadView UHDx IP address, refer to
for instructions on how to obtain this information.
4.
Select the
Telnet Service
.
5.
Enter
23
for the
TCP port#
.
6.
Click
OK
.
7.
Select
Terminal > Setup
, and then set the
New-line
parameters as follows:
Receive:
LF.
Transmit:
CF + LF.
CHAPTER
4
COMMAND LINE
CONTROL
No t e
Tera Term
for Telnet or serial control of the QuadView
UHDx from a PC.
4.1 Connecting to the QuadView UHDx via Telnet/IP
