350-12245-01 – updated December, 2019
QuadView UHDx/UHDx KVM User Guide
25
C H A P T E R 3
O p e r a t i o n
RG B
3.8.3
Audio Settings
The
Audio Settings
area of the
General
.
Figure 3-8
General > Audio Settings
This tab contains the following functions:
Audio Input:
To route an audio input to the audio outputs, select it here.
Audio Volume:
Output volume ranges from 0 to 10, where:
Zero (0) mutes the audio output.
10 is the maximum volume.
If you have muted the audio output using the
Audio Mute
control on the
Advanced
tab, then changing the audio volume will un-mute it.
Audio Input Configuration:
Configure audio as follows:
HDMI or DisplayPort input with a PC or other device that does not
support embedded audio output via HDMI:
Set the
Audio Input
Configuration
to
External
for that input. Make sure to connect the
audio output from your source as described in
. This setting associates an analog audio input
with the corresponding HDMI or DisplayPort input.
PC or other device that does support embedded audio output via
HDMI:
Set the
Audio Input Configuration
to
Auto
to route the HDMI/
DP (digital) audio signal to the
HDMI
and
OPTICAL
audio output when an HDMI or
DisplayPort input is selected.
Click
Save
to confirm your changes when you have finished configuring audio settings.
