Testing and Care
Mother Transmitters User Guide
Page 23 of 30
0510-1020-O
Replacing
the Clamp
In some cases, you need to replace
damaged transmitter clamps. This is done
by opening the existing clamps, snapping
them off of the transmitter, and inserting
new clamps.
To replace a transmitter clamp:
1. Open the clamps all the way and gently
remove them from the transmitter.
2. Insert the first clamp into the transmitter
by inserting the right oval-shaped pin
into the hole on the right of the
transmitter.
3. Next, line the
left oval-
shaped pin up
with the hole
on the left side
of the
transmitter.
4. Gently snap
the left oval-
shaped pin into
the hole.
5. Close and secure the clamp.
6. Repeat the previous steps for the
second clamp.
CAUTION
: Use care around the piercing
contacts on the transmitter as they are
extremely sharp. Placing your fingers
directly on the piercing contact can result in
injury.
