Testing and Care
Mother Transmitters User Guide
Page 21 of 30
0510-1020-O
7. Retest the device. If it fails a second
time, DO NOT USE THE
TRANSMITTER CLEARING DEVICE
and contact RF Technologies Technical
Support.
Transmitter
Cleaning
and Care
This section provides detailed information
about cleaning and caring for a transmitter.
For an up-to-date list of approved cleaning
solutions, visit:
www.rft.com/Resources/Manuals & Specs/
Transmitters/Transmitter Approved Cleaning
Solutions
CAUTION
: Use of non-approved cleaners
on transmitters can cause permanent
damage to the transmitter and the piercing
contacts and will void any and all
warranties.
To clean a transmitter after use:
1. Remove the banding material from the
transmitter and dispose of it.
2. Use the provided brush to clean the
hard-to-reach areas. After each use,
brushes can be disposed of or
disinfected with alcohol according to
your facility’s infection control
procedures.
3. Disinfect the transmitter with an
approved cleaner.
NOTE
: In order to avoid nuisance alarms,
cleaning procedures must be performed at
least 100 feet from any Alarming Band
Zone.