General Information
Page 14 of 30
Mother Transmitters User Guide
0510-1020-O
LED Light
Guidelines
The LED lights and audible beeps on the
transmitter signal various meanings. These
meanings are described in detail throughout
this document. The following guidelines
apply to the Mother transmitters:
Light Flash Meaning
How to Respond
No LED
activity
Mother transmitter is
in transport mode
Prior to shipping, the transmitter
is placed in transport mode to
prevent battery drain.
Tap the transmitter to exit
transport mode
No LED
activity
Mother transmitter
battery is expired
When a Mother transmitter is
banded but the LED indicator
exhibits no flashes when the
transmitter is tapped, the battery
voltage is too low for the Mother
transmitter to function
Discard transmitter and call RFT
Tech Support for replacement
1 Red
The Mother
transmitter is tapped
once to verify it is
ready to be linked
The red light signals the
transmitter is in Link mode
1 Green
An “unassigned” or
stored Mother
transmitter is tapped
once to verify it is
ready to be linked
The Mother transmitter is still
linked to an Infant transmitter.
Clear the Mother transmitter
using the Transmitter Clearing
Device
1 Green
With an Infant
transmitter within
range, the Mother
transmitter is tapped
once to verify
The Mother and Infant
transmitters match so no action
required; operates as designed
4 Green
Mother transmitter
recongnizes an
Infant transmitter and
links to it
The Mother transmitter decodes
4 signals then beeps once
The transmitter is successfully
linked so no action required;
operates as designed
