The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V..
QIG_L-gateway_v1.20
Page: 3(
12)
1 Introduction
The L-gateway is a ruggedized modular outdoor gateway (base station) that enables versatile
wireless connectivity to your Internet of Things (IoT) applications. With the modular 3 radio
design, it can quickly be adapted to a variety of wireless sensor technologies at regional RF
bands. Standard the L-gateway ships with one 868MHz LoRa® radio installed.
LoRa® RF technology has been pioneered by Semtech and is a 2-way wireless solution,
operating in the license exempt ISM bands, that complements M2M cellular infrastructure. It
provides a low-cost way to connect battery operated and mobile devices to the network
infrastructure.
The L-gateway uses a web-based management system, but you can also configure the unit
through the command line interface using SSH.
This document provides information on the following topics:
•
L-gateway hardware identification.
•
L-gateway hardware installation.
•
L-gateway logging into the web user interface.
1.1 Check Your Package Contents
These are the items included with your L-gateway purchase:
1x L-gateway unit
1x PoE Power Supply unit
2x RJ45 plug assembly
1x RJ45 watertight cap
Mains Power cables
Dependent on the territory different power supplies will be supplied. In Europe a European style
220V/AC power cable is supplied. In Canada and the USA an 110V/AC power cable is supplied.
European 220V/AC cable
USA/Canadian 110V/AC
cable
