The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V..
QIG_L-gateway_v1.20
Page: 6(
12)
4 Connectors on the L-gateway Unit
This section provides an overview of the connectors on the L-gateway unit.
1A
LoRa Radio 0, N-connector female
1B
Optional LoRa Radio 1, N-connector female
1C
Optional LoRa Radio 2, N-Connector female
1D
Optional GPS connector, N-connector female
1E
Optional radio connector
1F
Optional radio connector
2A
RS485 console port
2B
Ethernet 0, including 802.3af PoE
3
Green power LED (on = power on)
4
Ground (earth) connectors
4.1 Assembling the Power-over-Ethernet RJ-45 connector
This section provides instructions for connecting the Power-over-Ethernet cable to the L-gateway
enclosure. The port labeled “Ethernet 0 (PoE)” provides both the Ethernet data connection to the
unit as well as the 48V/DC (802.3af compliant) power connection.
1
RJ45 plug
2
Gasket seal
3
Plug holder
4
Seal assembly
Assemble the water tight RJ-45 connector plug and connect the RJ-45 connector plug to the
Ethernet cable.
