The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V..
QIG_L-gateway_v1.20
Page: 12(
12)
After successful login the following status page will be displayed:
Figure 4: L-gateway LoRa status page
The LoRa configuration is disabled per default. By clicking ‘Enable’ the LoRa function is switched
on.
LoRa sensor messages are received on the radio interface and are forwarded to your back office
over a simple UDP interface on port 1700. This UDP protocol is the default transport mechanism
as implemented by the Semtech packet forwarder as found here: https://github.com/Lora-
net/packet_forwarder.
You can point the L-gateway to your back office by changing the ‘Solver ip’ and ‘Solver port’
setting to reflect your own back office settings.
As long as the L-gateway is deployed outdoors and has sufficient reception the location of the L-
gateway is automatically reported based on the basis of GPS signals. If you find that you have
no GPS reception it is possible to override this feature by enabling ‘Fixed coordinates’. Once this
feature is enabled the Latitude, Longitude and Altitude as defined by the user are sent to the
back office.
