AS
Mxxxx Series User’s Manual
Asia Pacific | EMEA | Americas
110
Use Interval:
After each of the
RX Power Logging
,
Tx Power Logging
and
VSWR Level Logging
fields there is a
Use Interval
selection box. If
selected, each of the Logging activities will use the displayed
Logging Interval
value between log entries. If not selected,
logging of the respective data will occur for every measurement cycle.
Rx Power Logging Resolution:
If the difference between the current Rx level and the last level logged is less than this value, a new record will not be written to
the history data files. Higher values will make it less likely that a new data record will be required. This may greatly increase the
total period of time for which data can be stored in the available data memory space.
Tx Power Logging Resolution:
If the difference between the current Tx power level and the last level logged is less than this value, a new record will not be
written to the history data files. Higher values will make it less likely that a new data record will be required. This may greatly
increase the total period of time for which data can be stored in the available data memory space.
VSWR Logging Resolution:
If the difference between the current VSWR value and the last level logged is less than this value, a new record will not be
written to the history data files. Higher values will make it less likely that a new data record will be required. This may greatly
increase the total period of time for which data can be stored in the available data memory space.
Alarm Module Analogue Input Voltage Resolution:
If the difference between the current analogue input voltage level and the last level logged is less than this value, a new record
will not be written to the history data files. Higher values will make it less likely that a new data record will be required. This
may greatly increase the total period of time for which data can be stored in the available data memory space.
Defaults:
Clicking this button selects the factory default values which are:
Clicking
Apply
then saves these values into the ASM, or
Discard Changes
restores these values to their previous settings.
Discard Channels:
Click this button to restore the values to those present when the page was last re-displayed.
Apply:
This will apply the values entered.
