Rez?m G2200 Operator'S Manual Download Page 27 | Manualshive

Page: 27 / 90

Rez?m G2200 Operator'S Manual Download Page 27

3033-001 Revision D January 2018

©NxThera 2018

Page 27 of 90

2.1.2

Display Screen Map

The Rezūm Generator is equipped with a color touchscreen that can be viewed up to 8 feet
away from the generator. The display allows interaction with the generator using screen
buttons icons and menus with the touch of a finger with or without latex gloves.

A-Title Bar

B-Information Screen

C-Lower Toolbar

Figure 4: Display Screen Map

Item Description

A-Title Bar Brief title of the screen displayed

B-Information

Screen

Main area for screen information and error messages will be shown to
the user. Replace saline button is also available on the saline bag.

C-Lower

Toolbar

The bottom of all screens, except the start-up screens, will include the
same lower bar. This will have three features on it: volume adjustment,
product logo, and the Options menu button (if applicable).

Table 5: Display Screen Map

«
...
25
26
27
28
29
...
»

Summary of Contents for G2200



























































































Reviews:

No comments