background image

We are a small company out of Winnipeg, Canada. Years ago, I set out to make an amplifier that 
delivers the sound guitarists need that isn't in other amps, one that is extremely versatile in the tone 
and application. Luckily, when other musicians played my early prototypes, they agreed! The tone was 
fresh, unique and they all needed an amp for themselves! I quickly built a team of people as passionate 
about guitar as I am, and Revv was born. To be honest, it grew bigger and faster than I had ever 
hoped...

It has since been a long hard journey being a small business filled with long nights and people who 
didn’t believe in us. After endless tweaking and customer feedback, I’m at a place where I know we are 
building the best-sounding, durable, and most versatile amps that we can. It’s incredible hearing the 
kind words of amazing guitar players using Revv around the world, and we are just getting started. 

Thank you for believing in us and making this possible. Nothing makes this journey more fulfilling than 
seeing musicians using what we’ve built to make music. That is what this is all about, making music. 
Because we are still a small business, every little bit helps, and we would appreciate you sharing 
pictures of your Revv gear on social media, using it to perform your music, or simply telling a friend 
about it. Thank you for your support and for making music.

Dan Trudeau

President & Designer

Summary of Contents for Generator 120 MK3
























Reviews: