R E V V
| G E N E R AT O R 1 2 0 M K 3
20
SETTINGS &
SAVING CABINETS
The amplifier by default will power up with channel
1 loaded and all options turned off. But if you would
prefer to save how the amplifier powers up and how
each channel is set at power up you can!
Any combination of channels, drive, aggression settings
and functions can be saved so that the amplifier will
always power up in your favorite setting.
In order to perform this setting:
1.
Select the channel you want to power
up with and set it up to your preference.
2.
Press the store button and quickly release.
3.
The store led will now flash
4.
Press the CH button of the channel you have active.
The amplifier will now store your setting and confirm
it by flashing the store led quickly and turn off. That’s
it! Your favorite setting will now be loaded when the
amplifier is powered up. This will remain until changed.
Note:
Each channel can be set up this way, however,
the last channel saved will be the first channel to
become active when the power is turned on. So when
setting your channels up the way you want them when
power is applied, just remember that you want to save
your power up channel last.
FRONT PANEL & CAB LIGHTING
47
While we know a lot of people like the color-changing
Revv logo and cabinet lighting, some do not. The
option to turn this feature on and off has been added
to your amplifier!
To disable/enable the cab and logo lighting:
With the main power in the OFF position
1.
Press and Hold the GATE button then
power ON the amplifier.
2.
When the GATE LED begins to flash
release the button.
3.
If the GATE LED flashes 4 times, the cab save option
is disabled. If the GATE LED flashes 3 times, the cab
save feature is enabled.
The logo leds will either now be on or off for complete
amplifier customization!
SAVING GLOBAL/MASTERS
48
While the FX Loop and Master functions are considered
global settings across all channels, some players
might prefer that these functions are saved differently
on each channel. In this case, the amplifier has been
designed to offer either setting so that it is possible to
have each channel call up a different setting for both
the FX loop as well as the master volumes.
This can be a pretty powerful feature if your settings
will always remain the same.
By default, these functions are set to global as most
players will require the FX Loop and master to remain
the same across all channels (global).
But to toggle the amp to store these settings differently
among the channels, simply turn on the saved FX Loop/
Masters setting.
With the main power in the OFF position:
1.
Press and Hold the FAT button then
power ON the amplifier.
2.
When the FAT LED begins to flash,
release the button.
3.
If the FAT LED flashes 4 times, the setting is saved
to store the FX loop/masters how you want them
to all channels. If the FAT LED flashes 3 times, the
setting is saved to global.
