Revv Owner’s Manual - 27
Now, anytime you send that program number to the amplifier from your
MIDI pedal or other external equipment, the amplifier will switch to that
saved configuration. This will allow for any configuration of your settings to
be recalled with any MIDI device!
MIDI Controllable Functions
The amplifier functions that can be controlled via MIDI are as follows:
Channel Selection
3 Dynamic Levels (Channel 2)
Bright function (Channels 1& 2)
Contour Function (Channel 2)
FX Loop in/out
Reverb
Reverb Decay Levels
Solo Boost
Mute
These functions can be set & controlled in a MIDI program change set-
ting, where one program change command will call up a configuration of
the above settings, or continuous controller commands, where a CC
command will switch any one of the functions listed above, independent
from any of the others. The CC command functions are great for things
like instant access buttons on foot pedals etc.
6.4
