Revv Owner’s Manual - 17
MIDI Connections
Note: The Dynamis Combo does not include midi.
The MIDI IN connection is for external equipment connections when
your rig necessitates control of your Revv with third party gear.
Foot Switch Connection
This connection both powers your footswitch & allows it to control your
Revv.
Should the provided footswitch cable fail, any Ethernet cable can be
used. However, this cable sends data between the amplifier & footswitch
& if a lower quality cable is used incorrect switching or erratic behavior
may occur. A high quality cable is recommended, which can be provided
by Revv should you need a replacement.
Speaker Cab Lighting
Revv speaker cabinets each have an illuminated up logo which is pow-
ered from the cab lighting jack on Revv amplifiers. This is a 4 pin DIN jack
that should be connected to the 4 pin DIN jack of a Revv speaker cabinet
only. The logo will change colors in conjunction with the channel switch-
ing of your head.
Note: This jack can only be used with Revv speaker cabinets.
Solo Level Control
This knob sets the level of the Dynamis’ solo boost which is engaged
when pressing button #3 on the footswitch. You could also use this to
reduce volume.
