Revv Owner’s Manual - 18
Serial Effects Loop
This effects loop is foot switchable, preset recallable, & MIDI + CC con-
trollable. It has also been given an On & Off control ability to have the
send level control & FX Loop jacks removed from the signal path entirely
- even though it was designed from the start to be as transparent as pos-
sible.Tube driven with the send output buffered at 900 ohms.
FX Loop On/Off
The amplifier’s footswitch (button #5 in control mode) is used to switch
the effects loop in & out of the signal path to make it easier to apply &
remove effects to the guitar signal on the fly.
If you do not use the footswitch, the FX loops will always default to an on
state. If the footswitch is plugged in - the FX loop defaults to off unless acti-
vated via the footswitch.
Midi will always be able to control FX loop state as well.
SEND Level Control
This effects loop has a Send Level control to make sure your effects
volume is optimal. Always make sure to check this knob if you are experi-
encing any overly loud, or quiet effects - or level issues of any kind.
If your effects start clipping - you are driving the loop too hard with this
control.
4.0
4.1
4.2
