Provisioning file parameters
The following table lists the attributes that can be provided as part of a provisioning file. If a specific attribute
is not provided and the value is not set in the phone, the default value as described will be used.
Config attributes
Default
Value
Type
Values
Description
voip.registrar
TEXT
""
The IP address or DNS name of the SIP registrar server. Required.
voip.registrar-backup
TEXT
""
The IP address or DNS name of a failover SIP registrar, it should be
configured with the failover or secondary SIP registrar IP address or domain
name if applicable. If no failover or secondary SIP registrar is present in the
VoIP infrastructure, this field should be left blank. When this field is
specified, the phone will register with the primary SIP registrar (The
'Registrar' field) if it is accessible. If the primary SIP registrar becomes
inaccessible via UDP or TCP, the phone will attempt to register with the
backup registrar. If the phone successfully registered with the backup
registrar, it will switch to the backup registrar to perform outgoing calls and
receive incoming calls. While the phone is registered with the backup
registrar, it will monitor the primary SIP registrar connection. Once the
primary SIP registrar becomes available again, the phone will roll back to
register with the primary registrar and route SIP traffic from/to the primary
registrar.
voip.proxy
TEXT
""
Enter the outbound SIP proxy server's IP address or name here. If there are
multiple SIP proxies, separate the addresses by a comma. Also note that if
the allow strict routing option is set and you have a SIP proxy that is
configured for loose routing, add the designation after the proxy's address,
for example, '10.134.129.101;lr'.
voip.id
TEXT
""
This holds the phone's SIP ID used for SIP registration. If this field is left
blank, the voip.user (User name) field will be used as the ID.
voip.name
TEXT
""
Voip.name (Display name) is shown when an outbound call is made. If no
Display Name is provided, the User name will be used. Please note that the
IP PBX might override the Display name sent by the FLX UC and replace it
