61
Configuring the FLX UC 1000 or FLX UC 1500 for
your VoIP Network
This section will provide details on how to configure the device to connect to a
call manager. The information provided here is general to any call manager,
and provides the details of how to access the configuration settings on the FLX
UC 1000 or FLX UC 1500 to enter in the specific call manager information.
Some sample configuration for specific call managers, including the mappings
of fields, is provided in the appendix of this manual. The Revolabs web site at
www.revolabs.com
provides more information and samples for several call
managers.
There are three methods on how the FLX UC 1000 or FLX UC 1500 can be
configured on the network –from the Web UI, using the dialer, or using a
provisioning server with DHCP Option 66 or 150.
Configuring using the Web User Interface
All SIP configuration parameters are available in the Settings - SIP Settings and
the Settings – Transport menus.
Once the required configuration information is entered on each of the sides,
click the “Submit” button on the top right of the screen to save the changes.
It is recommended to reboot the device once all configuration changes have
been performed.
Configuring using the Dialer
The Dialer is not the recommended way to configure the phone as entry,
specifically of characters, through the dial pad is time consuming.
A small set of the SIP settings can be accessed and configured from the Dialer.
From the Main Menu, select Settings, Admin Settings, and then the VoIP
Settings for a list of the available configurations items.
Select any configuration item and press the [Edit] button at the bottom of the
screen to enter editing mode. After providing the necessary information, hit the
[Apply] button to save the changes.
