58
choose the [More >] soft key and then press the [Dial] soft key at the bottom of
the screen to redial that number.
Dialing a Contact
To dial a contact, from the Main Menu, select Contacts. Select the desired
contact from the list using the navigation keys. To call the
Default
number of
the contact press the [Dial] soft key at the bottom of the screen or press the
green off-hook buttons. To dial one of the non-default numbers of the contact
open the contact, then select the desired number with the navigation keys
before pressing the [Dial] soft key at the bottom of the screen or pressing the
green off-hook button.
Initiating a second call while another call is active
Select [New Call] along the bottom of the screen, enter the second number, and
press the [Dial] soft key or the green off-hook button to establish the second
call. The first call will be put on hold. To switch between calls, select the
desired call in the display using the navigational keys, and then press the
[Swap] button at the bottom of the screen. This will make the selected call
active, and put the previous call on hold. To join the two calls in a conference
call press the [Join] soft key.
Answering an Incoming Call
While on a call, answer an incoming call by hitting the green off-hook button
on the dialer or base. The previously active call will be put on hold.
Ignoring an Incoming Call
To ignore the incoming call, select it through the dialer and press the [Ignore]
button. Alternatively, press the red on-hook button on either base or the
dialer.
Hanging Up a Call
Pressing the red on-hook button will hang up active calls.
USB Audio
To use the FLX UC 1000 or FLX UC 1500 for USB audio, the USB settings in
the system needs to be configured by selecting USB Always Enabled, USB User
Determined, or USB Calls Only.
If the system is not to be used for USB audio it is recommended to select USB
Always Disabled as the USB setting.
