26
27
m Replace the Body Pads onto their plastic liner after use.
n Unplug the Electrode cord from the socket on Revitive.
o The stimulation can be paused if necessary by unplugging
the electrode cord from Revitive or from the pads. Revitive
will pause for up to 10 minutes during which time you can
re-connect and press (+) to re-start the stimulation.
After 10 minutes of being in the paused state, Revitive will
switch itself off.
Step 4.1:
Switching between EMS and TENS mode
To change between EMS and TENS mode, press the button of the stimulation mode
you require on the remote control.
You will see the mode selected highlighted on the display.
During use, switching from EMS to TENS mode (or vice versa), will reset the timer
back to the relevant default time. The intensity will also be reset to zero.
0
0
3o
0
0
3o
Instructions for use
j Press the (+) Intensity Control once to start
stimulation.
Continue to increase the intensity until you can feel
the stimulation. You can set the intensity between 1-99.
You can use the buttons on the device or remote control.
Press the (+) button to increase the level.
Press the (–) button to decrease the level.
It is normal to feel tingling or varying sensations in
the muscles you are treating.
Please note that the intensity required may vary from
day to day.
k The Time display will start to count down in minutes
as Revitive cycles through its program.
When Revitive times out, you will hear three beeps,
and the device will switch itself off automatically.
l Ensuring that the device is switched off, gently peel the
Body Pads from the skin.
Do not pull the Body Pads off the skin using the
Electrode cords as this may damage the cords.
70
3o
If you feel pain or discomfort:
• Lower the intensity of the Body Pads using the (–) Intensity Control on
the device or remote control.
• You can also choose to stop therapy before the end of the 30 minute session
to avoid skin irritation and/or muscle fatigue. You can do this by pressing the
power button on the device or on the remote control.
5603_IFU02_17807098.indd 26-27
5603_IFU02_17807098.indd 26-27
12/01/2021 08:53
12/01/2021 08:53
