Making the wheelchair smaller
GB23
Removing the seat (see fig. 1)
1. Pull up the back of the seat.
2. Lift the seat out of the frame.
Remove the backrest from the backrest frame
(see fig. 2)
Lift the left and right knobs of the top
1.
fittings at the same time.
Rotate the backrest forward so that
2.
the U profile releases from the backrest
attachment points.
Release the knobs of the top fittings.
3.
Lift out the backrest.
4.
Removing the legrests (see fig. 3)
1. Loosen the star knob which attaches the
legrests to the seat frame.
2. Pull the legrests out towards you.
Side equipped with armrest (see fig. 4)
1. Loosen the star knob at the bottom of
the sides.
2. Lift the entire side upwards out of the seat
frame.
Removing the headrest (see fig. 5)*
1. Loosen the star knob.
2. Remove the headrest from the wheel-
chair.
Backrest tubes (see fig. 6)
1. Loosen the socket screws in the backrest
hinge points.
2. Move the backrest frame towards the seat
frame.
3. Retighten the socket screws.
* If applicable
fig. 1
fig. 3
fig. 4
fig. 6
fig. 5
fig. 2
