Settings and adjustments
GB15
The Canto Nxt has a wide range of settings
and adjustment possibilities with which the
wheelchair can be adjusted to suit all the
requirements of the user. Revab recommends
that you consult your dealer with regard to
the settings. You can easily make adjustments
yourself, without the use of tools.
Frame
Seat width
The width of the seat frame is adjustable and
can be set to widths of 37, 42, 47 and 52 cm. It
is also possible to fit the sides, with armrests,
further in or out. This adjustment can be made
separately on the left and on the right. Each
side, with armrest, is continuously adjustable.
It can be moved 3 cm in or out*.
Outwards
Loosen the socket screw (A).
n
Set the seat to the required width.
n
Retighten the socket screw (A).
n
Repeat this on the other side.
n
Inwards
Loosen the star knob (B) and lift the entire
n
side (C) out of the adapter.
Loosen the socket screws (D) and remove
n
them from the fastening.
Turn the lower part 180°.
n
Reconnect the two parts to one another
n
using the socket screws (D).
Replace the entire side (C) in the adapter
n
and retighten the star knob (B).
If you want to adjust the seat width less
n
than 3 cm, loosen the socket screw (A).
Set the width of the seat as required.
n
Retighten the socket screw (A).
n
Repeat this on the other side, if required.
n
* In the case of a manual wheelchair,
the wheel size and seat angle
adjustment might be a hindrance.
C
D
B
A
