Step 3. The Orientation Interface will close automatically after finish the orientation.
Then you can use electronic pen or writing pen (finger) to operate on the whiteboard
normally.
6.2 Hotkey Setting
At the first time you use the whiteboard with soft hotkeys, you need to set these hotkeys.
Step 1. Select
“Start > Programs > IQBoard ET & PS Drivers >Hotkey setting”
to enter the
setting window, as follows
Prompt:
1. If you did not locate the accurate central point or clicked the wrong point, or the next
fixed point appeared without press, please press “ESC” on the keyboard to exit this
orientation and re-orient. Otherwise you can’t operate the whiteboard accurately.
2. Please make your electronic pen or writing pen (finger) upright when orienting.
3. In case the relative position of the whiteboard and projector is changed, or the driver or
the monitor resolution is altered, please re-orient.
