Chapter 5 Install and Uninstall Drivers
5.1 Install Drivers
Run
“IQBoard ET & PS Drivers.exe”
in the installation CD, and install the drivers
according to the prompt. The computer will automatically find a new hardware and
install the drivers.
After the installation is completed, if the indicator beside the USB connecting port
turns green, the whiteboard can be used normally. If the indicator turns red, it means
the USB cable is not well connected, please re-connect the USB cable or restart
computer. If the indicator is not lighting, it means the USB cable is not connected.
Indicator is not lighting
Indicator turns red
Indicator turns right
USB cable is not connected.
USB
cable
is
not
well
connected, or the drivers are
not correctly installed
The whiteboard works
normally.
5.2 Uninstall Drivers
Select
“Start > Programs > IQBoard ET & PS Drivers >Uninstall”
to uninstall. You also
can open Control Panel, select
“Add/Remove Programs”
, and in the list of currently
installed Programs, select
“IQBoard ET & PS Drivers”
, then press the
“Change/Remove”
button to remove the drivers.
Prompt:
1. If it is the first time you connect the computer to the whiteboard, and the drivers are not
installed, the system prompt “Found New Hardware”, you can ignore or close the prompt,
and continue to install the driver accord to the above steps.
2. No restriction on Windows user account (Administrator, Guest, and Limited User).
