Retsch PM400 Manual Download Page 9 | Manualshive

Page: 9 / 60

background image

Notes on the Operating Manual

9

1.2 General safety instructions

CAUTION

Read the Operating Manual

Non-observance of these operating instructions
–

The non-observance of these operating instructions can
result in personal injuries.

•

Read the operating manual before using the device.

•

We use the adjacent symbol to draw attention to the
necessity of knowing the contents of this operating
manual.

Target group

:

All persons concerned with the machine in any form

This machine is a modern, high performance product from Retsch GmbH and
complies with the state of the art. Operational safety is given if the machine is
handled for the intended purpose and attention is given to this technical
documentation.

You, as the owner/managing operator of the machine, must ensure that the people
entrusted with working on the machine:
•

have noted and understood all the regulations regarding safety,

•

are familiar before starting work with all the operating instructions and
specifications for the target group relevant for them,

•

have easy access always to the technical documentation for this machine,

•

and that new personnel before starting work on the machine are familiarised
with the safe handling of the machine and its use for its intended purpose,
either by verbal instructions from a competent person and/or by means of
this technical documentation.

Improper operation can result in personal injuries and material damage. You are
responsible for your own safety and that of your employees.
Make sure that no unauthorised person has access to the machine.

CAUTION

Changes to the machine

–

Changes to the machine may lead to personal injury.

•

Do not make any change to the machine and use spare parts and
accessories that have been approved by Retsch exclusively.

NOTICE

Changes to the machine

–

The conformity declared by Retsch with the European Directives will lose
its validity.

–

You lose all warranty claims.

•

Do not make any change to the machine and use spare parts and
accessories that have been approved by Retsch exclusively.

«
...
7
8
9
10
11
...
»

Summary of Contents for PM400





























































Reviews:

No comments

Related manuals for PM400

Brand: Veit Pages: 70

Brand: Nakayama Pages: 101

Brand: Pulsar Pages: 2

iX05 black edition

Brand: Levolta Pages: 14

BANDSAW BLADE SHARPENER

Brand: Woodland Mills Pages: 56

GC-CG 3,6 Li WT

Brand: EINHELL Pages: 72

Brand: Wacker Neuson Pages: 36

Brand: MFJ Pages: 2

Brand: Chauvin Arnoux Pages: 33

Brand: Parkside Pages: 16

Brand: Wen Pages: 2

Brand: BGS technic Pages: 8

Brand: RED ROOSTER Pages: 8

Brand: R&S Pages: 176

Brand: TAPCO TOOLS Pages: 4

Brand: Gedore Pages: 246

Brand: Parkside Pages: 65

Brand: Neilsen Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands