Display and operation
45
6.8.1
Automatic opening
In this menu you can set whether the grinding jar lid opens automatically when
grinding ends or only when the button is pressed.
If the function is switched off, the following pictogram appears on the display as
confirmation.
Fig. 29: Automatic opening pictogram
6.8.2
Language
You can select the menu language here. After selecting and pressing the control
knob, the entire menu structure is displayed in your language.
NOTICE
The language menu is displayed when the device is switched on for the first time.
•
Select the desired language by turning the control knob.
–
Press to confirm the selection; “open lid” appears on the display.
6.8.3
Brightness
The brightness can be adjusted to suit the respective user or environment
(sunshine, glare etc.).
6.8.4
Date
The current date can be entered here.
The device can be disconnected from the mains for up to 30 days before the
settings are lost.
6.8.5
Time
The time can be entered here.
The time then appears in the stand-by monitor.
The device can be disconnected from the mains for up to 30 days before the
settings are lost.
6.8.6
Acoustic warning signal
Error messages indicating incorrect operation can be supported by an acoustic
warning signal. The corresponding pictogram appears if the function has been
switched off
6.8.7
Service
6.8.7.1
Operating hours
Grinding hours are counted, i.e. the total times between START and STOP. It is
not possible to manipulate the times.
6.8.7.2
Software version of display
Shows the software version of the display.
6.8.7.3
Software version of the controller
Shows the version of the operating software .
6.8.7.4
Update software
6.8.7.4.1 Display
–
The target display unit is selected on the PC using a selection menu for
updating software.
Summary of Contents for PM400
Page 3: ...3 ...
Page 23: ...Operating the machine 23 Fig 9 View of the back of the device S T U V W X Y ...
Page 58: ......
Page 59: ......
