Cleaning, wear and service
48
8 Cleaning, wear and service
WARNING
Risk of a fatal electric shock
-
An electric shock can cause injuries in the form of burns and cardiac
arrhythmia, respiratory arrest or cardiac arrest.
•
Do not clean the blender under running water. Use only a cloth dampened
with water.
• Disconnect the power supply plug before cleaning the blender.
WARNING
W0012
The device must always be switched off and disconnected from the mains before
any interventions for cleaning or servicing purposes.
8.1 Service
Fig. 30: Closing pin maintenance
The following maintenance work should be carried out at regular intervals, and at
least monthly to guarantee the operational safety of the device:
•
Check roller (
1
) of the closing pin for free movement, and oil where
necessary, e.g. using sewing machine oil
.
•
Clean the magnets (
2
) on the closing pin.
Summary of Contents for PM400
Page 3: ...3 ...
Page 23: ...Operating the machine 23 Fig 9 View of the back of the device S T U V W X Y ...
Page 58: ......
Page 59: ......
