12
Reinstall the Burner Module
Note: If the circulating fan is to be installed, it should be done at this point before installing the burner
module. See instructions packaged with the fan for installation details.
Reinstall the burner module using the 4 screws removed previously.
Note: The upper baf
fl
e may be removed to gain more room for the screwdriver to install the rear screws.
Connect the Gas Line and Test-Fire the Unit
Connect the gas line to the burner module. Check for leaks, purge the line and, test-
fi
re the unit before installing the
window or proceeding with the remainder of the install. See
Lighting Instructions
section.
Reinstall the Top Baf
fl
e
(if removed)
Install Top Convection Baf
fl
e
Position the
fi
rebox
as far back as
possible within the existing
fi
replace
to
allow ample space at the front for the fret.
Position the top convection baf
fl
e with the
threaded studs pointing downwards into the
slots at the top of the
fi
rebox.
Slide the convection baf
fl
e as far forward as
possible and tighten the wingnuts.
Reinstall Burner
Module (4 screws)
Edge Fits into
Cleat at Back
Remove Top Baffle
(2 screws)
Remove Top Baffle (optional)
(to provide space for a screwdriver)
Edge fits into
Cleat at Back
of Firebox
Reinstall Top
Baffle (2 screws)
Co
nvec
tion Baff
le
Wingnuts(2)
Start Wingnuts an Studs.
Slide Convection Baffle
into slots. Adjust
Baffle Forward to Touch
Back of Smode Curtain of
Existing Fireplace.
Tighten Wingnuts.
Firebox Installation
Summary of Contents for RF24BN
Page 24: ...24 Parts ...
