Retrofire RF24BN, Installation And Owner'S Manual

Page: 13 / 24

13
Install the Ceramic Brick Liner
Install the ceramic brick liner taking care not to damage them as the material is fragile. The top rounded edges
of the side panels should face inwards and the front edge is bevelled. Place the side brick panels
fl at up high
against the side of the fi rebox and slide them downward into place, behind the frame of the fi rebox.
Side Brick Behind
Firebox Return
Side Brick in front of Rear Brick
Rear Brick
Left
Brick
Rest Brick on
Rear Log Support
Rear Brick
Rear Brick
Left
Brick Right
Brick
Install the Ceramic Log Set
Carefully remove the ceramic logs from the packaging, taking care not to damage them. Install the logs as
described below.
Log position is critical to the look of the fi re and should be done carefully to avoid
problems.
Drop Rear Log into place
behind front log retainers
Front Log locating pins
Rear Log Touches
Front Log Here
Right Log
Locating Pins
Place Font Log onto locating
Pins at Each End
Ceramic Fuel Bed Installation