14
Technical documentation I Vision Vent 2 Hood I Transport and installation
•
fit the 0610 hood onto the appliance, taking care to correctly
connect the hood input (the tube at the back of the hood) onto
the appliance’s flue - see fig. 2. due to the weight of the hood,
a sufficient number of persons will be needed for this operation.
figure 2: fitting the tube into the flue for an 0611 hood
•
fitting a 623 hood to an appliance
figure 3: fitting a 623 hood
•
fit the grease filters supplied with the hood to the suction
opening in the front part of the hood.
•
Start with the two outer filters (they have a rim) (see fig. 4), and
then insert the middle filter between them.
figure 4: grease filters in a 0610 hood
•
The procedure for installing filters to a 623 hood is the same as
the one described above (see fig. 5)
figure 5: grease filters in a 623 hood
3. 3 checking the installation point
Check to make sure the electrical connection parameters match
the parameters on the nameplate. This will help you avoid problems
and delays in installing.
