23
mOdel OraNge
1. hold down the buttons
and
.
2. Enter the service piN. using the buttons
and
enter
the number which is flashing up on the screen. Then move
to the next position with button
or
and repeat the
process.
finally, confirm your piN with button
.
3. use button
to confirm item 1. “CoNfiguraTioN”
4. use arrows
and
to select item 1.9. “hood” and use
buttons
,
and
to change it to “yES”
5. Now press the
button twice to return to the main screen.
cONtrOllINg the hOOd IN the dIagNOStIcS
(fOr teStINg purpOSeS)
1. hold down buttons
and
.
2. use buttons
,
,
and
to enter your service
piN.
3. use arrows
and
to select item 2. “diagNoSTiCS”
and confirm by pressing button
.
4. use arrows
and
to select item 2. 6 “hood” and
confirm by pressing button
.
5. The
button can now be used to control the hood’s motor.
Every time the button is pressed the following values appear:
0
(motor off),
1
(motor on at low speed),
2
(motor on at higher speed)
6. finally, press the
button three times to return to the main
screen.
8. fault repOrt IN cONNectION wIth
the hOOd
as soon as the hood is in the right configuration and everything
is correctly connected, it is ready to go. if this is not the case, the
display screen of the appliance will show error report Err 62.5 -
72.5. you should then check and connect all the cables, circuit
breakers (fuses) and terminals as described above. if the hood is
being powered from a separate power supply, check that the socket
has the correct voltage.
Technical documentation I Vision Vent 2 Hood I Transport and installation
