6
Ideal Placement
•
Make sure the location you choose is as close to an air
supply duct as possible and as far away from the HVAC air
return duct as possible. This will ensure that the oxidizing
molecules produced by the ReSPR FLEX are optimally
circulated.
•
Each ReSPR FLEX can effectively treat 3,000 sq feet of
space as long as there is air circulation in the space. Be sure
doors are open in areas that you wish to treat.
•
To ensure the unit works properly, there should be as much
space as possible in front of your ReSPR FLEX so that It
can efficiently process the air in the area.
•
Place ReSPR FLEX on a shelf or counter top.
Never place an operating unit on the floor.
Operating ReSPR FLEX
1. Connect the Power Cord to the Power Adapter and the
Power Adapter Plug into the unit. (Check to be sure your
power supply is properly assembled. The Power Cord should
be inserted far enough into the Power Adapter so that a
space of only about 1/8 in. is left between the widest part of
the power cord and the edge of the Power Adapter).
2. Insert the Power Plug into the wall outlet.
3. Turn on the unit by pressing the POWER button and set
it to NORMAL mode. The screen will read PCO (Photo
Catalytic Oxidation) or NCC (Natural Catalytic Conversion).
This is the optimal setting for running ReSPR FLEX
continuously in your office or home. Adjust the fan to a
comfortable sound level using the up and down buttons
next to the display.
4. ReSPR FLEX comes with a remote control and one lithium
battery (CR20253V) for easier operation when the unit is
placed on a high shelf.
Set up and Operation
(Initial Setup)
6
