4
Quickstart
1
Place ReSPR FLEX on a counter top or shelf, not on the
floor. Ensure there is room in front and back of the unit for
air to flow through.
2
Plug the unit in with the included power cable.
3
Insert one lithium battery (CR20253V) inside the remote
control.
4
Power on with the remote or by pressing the display screen
then set the fan to a comfortable sound level. Leave the
ReSPR FLEX in NORMAL Mode - Screen will read PCO
(PhotoCatalytic Oxidation) or NCC (Natutal Catalytic
Conversion). This is the standard mode for occupied rooms.
HIGH mode, for burst disinfection, should not be used for
more than one hour in occupied space.
2
1
4
3
5
Use the AWAY MODE for a higher level of
disinfection when space is not occupied.
Pressing the Away Mode key will start
a timer (2 to 8 hours). The ReSPR FLEX
will go back to Normal Mode when the
timer ends or when you push NORMAL
Mode again.
NEVER USE AWAY MODE
WHEN ROOM IS OCCUPIED
Fan
speed
Purification
level
Size of the room
(only set in HIGH mode)
