13
Reinstalling the Filter
1. The larger flat side of the Filter Assembly faces the interior
of the ReSPR FLEX. A sticker reading, “Caution: Reinstall
Filter After Cleaning” will be visible.
Removing and Cleaning the Front Grille
1. Locate the Front Grille Screw
2. Using your screw driver, carefully remove the Front Grille
Screw. Place the Front Grille Screw where you will find them
easily during reassembly.
3. Remove the Front Grille carefully to ensure that the
Ionization Needle (in the top center of the front of the unit)
is not damaged.
4. Clean the Front Grille using (compressed air, vacuum
cleaner, damp cloth or warm soapy water) and set the
Front Grille aside.
5. If the Ionization Needle is visibly dusty, gently clean it with
a cotton swab and clear alcohol-based cleaner or rubbing
alcohol.
Reattaching the Front Grille
1. Align the Front Grille to the front of the unit, being careful
not to damage the Ionization Needle at the top center of
the unit.
2. Insert the screw and tighten it all the way.
13
