15
15
Troubleshooting
The Unit Fails to Turn on
1. Verify that the Power Plug is plugged into an operational wall
outlet.
2. Ensure that the Power Cord is fully inserted (leaving less than an
1/8”) to the Power Adapter.
3. Ensure that the Power Adapter Plug is fully seated in the
receptacle on the back of the unit.
4. Verify the Power Button has been activated on the Control Panel.
5. If the Power Button on the Control Panel fails, use the Power
Button on the Remote Control. If the Control Panel fails, contact
your distributor or ReSPR Technologies
(
www.resprtech.com
).
The Unit is Operating in High Mode or Away Mode, but No
Noticeable Purification is Being Produced
1. Ensure that the Purification Plate is clean (See Step 4).
2. The Purification Plate may not be working because it needs to be
replaced. Try installing a new Purification Plate.
3. Check the electrical contact arms which touch the plate to ensure
that they are making proper contact with the metal weave on the
Purification Plate.
4. Ensure the electrical contact arms which touch the plate are clean.
Clean them with a soft cloth and rubbing alcohol.
5. Turn the lights off In the room and look through the Front Grille at
the Purification Plate. If It is operating properly, it will produce a dim
purple glow.
