8
4.2 Camer
a Installation
Mount the camer
a in a selected location using the fixing screws and plugs supplied. If the
camera is installed outdoors on an external wall you will need to drill a cable entry hole of
around 15mm for the cable to pass through the wall. Feed the camera’s cable through the
cable entry hole into the property, so that all connections are made inside.
Ensure that there is a mains power socket internally located near to the camera for power.
After installing the camera, seal the cable hole using a suitable sealant to prevent drafts.
Loosen this nut by hand and
unscrew the bracket if ceiling
mounting is desired
Note: in this mounting position,
the Camera body needs to be
slightly tilted to prevent the
antenna from touching the wall
Bracket
HORIZONTAL
SURFACE MOUNT
WALL MOUNT
CEILING MOUNT
2.4
GHz
Weather-proof
2.4
GHz
Weather-proof
