16
6.6.1 Da
te/Time Setup
1.1
Use the left / right key to select the ‘Time Setup’ icon and press enter.
1.2
Use the left / right key to select the date or time. Use the up / down key
to set the correct digit.
1.3
Press enter to confirm settings.
6.6.2 Motion Detection and
Advance Setup
W
hen the DVR is set to motion detect, it records the photo or video by sensing any
change in picture from the selected camera and stores on to an SD memory card.
Although two cameras might be connected to the unit, it will only record from the
selected camera channel. The time and date of the capture are also recorded.
1.4
Use the left/right key to move to the
‘Motion Detect’ icon and pr
ess enter to
enable / disable auto capture.
1.5
Use the left/right key to move to the
‘Ca
pture Format’
icon and pr
ess enter to
select ‘Photo’ or ‘AVI’ (video). Note that the AVI video clips are fixed at
a 10 second period.
1.6
Use the left/right key to move to the
‘Setup’ icon and pr
ess enter.
1.7
Press enter to select the TV system, NTSC or PAL.
1.8
Use the left / right key to move to the image
‘Quality’ icon and pr
ess enter to
select high or low quality.
1.9
Use the left / right key to move to the
‘Motion Detect
Area (M)’
icon and pr
ess
enter. Use the left / right key to select the detection area (full / middle / small
area). Press enter to confirm the setting.
1.10 Use the left / right / up / down key to move the chosen detect area to a desired
target position. Press enter to confirm the setting and exit the area setup.
1.11 Use the left / right key to move to the
‘Motion Detect Count’ icon.
This is used
to set the number of photos the DVR will take for every trigger when the DVR
is set to photo capture mode. The settings are 1 / 3 / 5 photo shots. Press enter
to select the required number of shots.
