27
User Manual
6.2.1 Changing the Humidifier Setting
If you are using the REMstar Heated Humidifier with your BiPAP S/T,
you can adjust the humidifier heat setting by completing the following
steps:
1. From either the Standby or Monitoring screen, press and hold the
Heat
button for approximately 4 seconds. The Humidifier Setting
screen appears, as shown in Figure 6–6.
Figure 6–6 Humidifier Setting Screen
2. Press the
Heat
button to increase the humidifier setting, or press the
Ramp
button to decrease the setting. You can adjust the setting from
1
to
5
. The change takes effect immediately as you adjust the setting.
3. You can exit this screen by pressing the
Left
or
Right User
buttons or
the
Silence
button.
For additional information on using a humidifier with the device, see
Chapter 10.
6.2.2 Navigating the User Display Screens
You can navigate the rest of the user display screens by pressing the
Left
and
Right User
buttons.
You can change the settings on any of the display screens by pressing the
Heat
and
Ramp buttons
to increase or decrease the setting.
You can exit any of the user display screens by pressing the
Silence
button.