4 Room Layout Overview for Installation
Page 7
Resonance Technology, Inc.
CinemaVision System Installation / Operation Manual: RTC-CV Rev 19
4.
Room Layout Overview for Installation
WARNING: Absolutely no ferromagnetic tools should be brought inside the MRI Suite!
While no tools, other than tie wraps, are required to install the system in the MRI suite, absolutely all ferromagnetic tools
remain outside of, and away from the door leading to, the MRI suite.
Below is a typical MRI setup. Your individual installation may vary somewhat, but it will generally be spaced into three
areas: Control Room, Computer/Equipment Room and MRI Suite or Magnet Room.
The Control room setup consists of placement and connection of the CinemaVision Controller, Technologist Remote
Control, and LCD video monitor. Additional auxiliary audio/video sources such as an iPod
®
, iPhone
®
, MP3 player,
satellite receiver, or external DVD player may be connected.*
The Magnet room setup includes a single Laser Link cable bundle that will be connected from the CinemaVision
Controller unit through the filter panel wave-guide to the CinemaVision Transducer in the Magnet Room. With the
exception of the audio headset and visor goggles, all the Magnet Room components of the CinemaVision must be
installed to the side of the magnet shroud also the transducer power cable should never in parallel with magnetic coil.
Additionally, these components should be placed in an area not heavily trafficked to keep them from being damaged.
* “iPod” and “iPhone” are registered trademarks of Apple Inc.
