Easy Smart GbE Switch
adapter. Please use the +5V/1A power adapter provided with the Easy Smart GbE Switch. After the
switch powered on, the power LED is lit for a normal power status.
1.5 Installation
Desktop Installation
1. Place the switch on a flat desk.
2. Inspect the Power Adapter carefully and make sure that it is properly connected to a power
source.
3. Ensure adequate ventilation space around the switch for dissipating heat and air.
4. Power on the switch and it will automatically initialize and power LED turn on.
Installing Network Cables
To make a valid connection and obtain the optimal performance, an appropriate cable that
corresponds to different transmitting/receiving speed is required. To choose a suitable cable,
please refer to the following table.
Media
Speed
Wiring
Network
Media(Cable)
10 Mbps
10Base-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-
568 100Ω STP (maximum 100m)
100 Mbps
100Base-TX: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-
568 100Ω STP (maximum 100m)
1000 Mbps
1000Base-T: UTP category 5e, 6 cable (maximum 100m)
EIA/TIA-
568 100Ω STP (maximum 100m)
6
