Easy Smart GbE Switch
1. Click
Factory Default
to reset all switch configurations to the factory defaults and the switch will
restart automatically.
3.2.5 Config Save
Click
System
>
Maintenance
>
Config Save
You can save the current configuration easily by clicking the Config Save menu without any function
button and you’ll see the successful page directly.
Config Save Page
Note
:
1. To avoid damage, please don’t turn off the device before the configuration saved successfully.
2. Only by clicking the Config Save menu can you save the current configuration of the switch
effectively, so that the configuration you made this time will remain in effect next time you start it.
3.2.6 Reboot
Click
System
>
Maintenance
>
Reboot
Allow you to restart the switch without physically turning the power off.
Follow the steps below to reboot the switch.
1. Click
Reboot
to view the screen as shown next.
2. Click
Reboot
button, then the following remind view pops up, Click
OK
.
22
