Easy Smart GbE Switch
The following table describes the labels in this screen.
LABEL
DESCRIPTION
802.1Q Static VLAN Config
802.1Q Static
VLAN
Enable
or
Disable
the 802.1Q Static VLAN mode.
VLAN ID
Enter the ID number of VLAN. It ranges from 1 to 4094.
VLAN Name
Specify the
VLAN Name
for new created 802.1Q Static VLANs.
Port
Displays the port number of the switch.
Select All
Click
All
to configure all ports setting.
Untagged
Configure the egress rule of the traffic on the port as untagged. The
switch drops the tag header before sending the packet.
Tagged
Configure the egress rule of the traffic on the port as tagged. The switch
adds the tag header before sending the packet.
Not Member
Click
All
or any one port to set for not member of VLAN group.
Apply
Click
Apply
to make the settings take effect immediately.
802.1Q Static VLAN Table
VLAN ID
Displays the ID number of VLAN.
VLAN Name
Displays the name of VLAN.
Member Ports
Displays the port member in the VLAN.
Tagged Ports
Displays the tagged port members in the VLAN.
Untagged Ports
Displays the untagged port members in the VLAN.
Delete
Click
Delete
to remove some VLAN ID you selected before.
Select ALL
This helps to select all VLAN ID to be deleted at one time.
Note:
1. The default VLAN with VID being 1 cannot be removed but can modify untagged/tagged set and
member ports.
2. The VLAN ID only can be set from 1 to 4094.
5.3.2 802.1Q VLAN Port
Click
VLAN > 802.1Q VLAN > 802.1Q VLAN Port
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port so that
the frames are forwarded to the VLAN group that the tag defines. If you have one unit/PC that you
only want to use in VLAN4, then you set the connection port to VLAN4, and only that traffic will be
send to that specific port.
This page shows VLAN port information. User can assign PVID, tag egress mode, accepted frame
type of each port.
32
