Easy Smart GbE Switch
Click
System
>
Management
>
IP Address Setting
On this page user can get and modify the network parameters of the switch.
With editable textbox in the table
，
user could configure the field value.
LABEL
DESCRIPTION
DHCP Client
Enable
or
Disable
the DHCP function. If DHCP setting is enabled, the
switch will obtain the IP address, subnet Mask and default gateway
from the DHCP Server automatically; otherwise, these three items
should be configured manually.
IP Address
Enter the system IP address of the switch. The default system IP is
192.168.1.1 and you can change it appropriately to your needs.
Subnet Mask
Enter the subnet mask of the switch. By default, the switch uses
255.255.255.0 as the subnet mask.
Gateway
Enter the gateway IP Address of the switch.
Apply
Click
Apply
to make the settings take effect.
3.1.3 Port Setting
Click
System
>
Management
>
Port Setting
This page shows link status, speed, duplex, and flow control ability of all ports. User can change
port ability of switch in this page.,
1.
Hold
“Ctrl”
and the left button of the mouse to select the ports you need
,
and select the state,
speed/duplex, flow control of the ports.
13
