‧
Operating System Type/Version
‧
Host Network Name
‧
User Name
‧
MAC Address of all NICs (network interface card)
‧
Identify versions of all Driver DLLs and Libraries used (NDIS) and optionally
‧
Powerline Ethernet device chipset manufacturer name (85Mbps version Only)
‧
MAC Firmware Version (85Mbps version Only)
‧
Vendor name
Figure 9
: Diagnostics Screen
The
lower panel
contains a history of all remote devices seen on the computer, over time. Devices are shown
here regardless of whether or not they are on the same logical network. Devices that are active on the current
logical network will show a transfer rate in the Rate column; devices on other networks, or devices that may no
longer exist are shown with an “?” in the Rate column. The following remote device information is available from
the diagnostics screen:
‧
Adapter Alias Name
‧
Adapter MAC Address
‧
Adapter Password
52
Summary of Contents for Powerline 85M
