Control Mode provides access to the Loudspeaker
Amplifier’s internal DSP and allows you to control its
settings. You can enter Control Mode by clicking on the
Control button at the top of the main workspace, or from
within any loudspeaker’s Properties window. Any or all
of the Control functions can be restricted to authorized
operators who have password access; more information
on password authorization can be found in the
Supervise Mode section of this manual.
When you enter Control mode in the main workspace,
the directory tree on the left remains the same.
However, notice that the icons themselves have
changed. The CobraNet Rx and Tx arrows are gone. On
the left, an On/Off button allows you to switch the ampli-
fier(s) On or select Standby (Off) mode. The Wink but-
ton is below this switch. On the right, a Mute button is
labeled with a driver symbol. Below it is a Signal
Present indicator.
Double-click an array icon to open its Properties window in Control mode. Notice that the left hand section of the Control Mode
Properties window is the same as in Connect mode.
CONTROL MODE
On/Off (Standby) button
Wink light button
Signal Present indicator
Mute button
Status Indicator
Name
C
O
N
TR
O
L
M
O
D
E
32
Users Manual
IC-R
