Users Manual
IC-R
Continue until all networked loud-
speakers are linked to icons in the
main workspace. When an icon is
linked to a networked loudspeaker,
the status indicator under its name
changes from Unassigned (Red) to
OK (Green).
To confirm that the setup is com-
plete, return to System Layout and
place the cursor over the loud-
speaker listings in the directory
tree. As you can see from the pop
up screens, RHAON has assigned
IP numbers to each of the loud-
speakers.
Let’s take a closer look at the Connect Mode loudspeaker icon.
Clockwise from the top, the first item is the icon’s name. By default this is the model number of the actual loudspeaker. The loud-
speaker symbol on the right is a Mute control: click on it to mute or un-mute the loudspeaker. The green triangles on the far right rep-
resent CobraNet Transmitters (Tx). Each CobraNet Transmitter can transmit one channel of information from the DSP out to the
CobraNet network. The Red Status bar at the bottom of the icon indicates that the icon is Unassigned: it will be green and read OK
when this icon has been linked to a networked loudspeaker.
To its left is a “W” button. Click on it to Wink the light on the front of the networked loudspeaker that is linked to the icon. This makes
it easy to identify the loudspeaker and confirm its location. On the outside left edge of the icon are two red arrows representing
CobraNet Receivers (Rx): each can receive one signal out of a bundle of up to 8 audio channels from the network.
Double clicking on any loudspeaker’s Connect icon opens the Connect Properties screen associated with the linked loudspeaker.
More details on Properties screens are on the nexrt page.
Turns Mute ON & OFF
Turn “Wink” Light ON & OFF
Name
Status Indicator
CobraNet Transmitters
CobraNet Receivers
C
O
N
N
E
C
T
M
O
D
E
17
