Users Manual
9
To ensure proper air movement for the cooling of the amplifier, we recommend a minimum of 24 in. to 36 in. (65 cm to 100 cm) of clearance in
front of the loudspeaker and 1 in. to 2 in. (25 mm to 50 mm) of clearance from the other loudspeaker cabinet surfaces.
Installation should only be performed by skilled and qualified personnel who are experienced in mounting heavy loads to the intended wall
construction type.
These loudspeakers are designed to be securely mounted using the included Renkus-Heinz HK series hinge kits and are not intended to be free-
standing:
Models: IC8-RN, IC16-8-RN & IC16-RN
Hinge Kit Model: HK-IC8R &16R
Models: IC24-16-RN, IC24-RN, IC32-24-RN & IC-32-RN
Hinge Kit Model: HK-IC24R &32R
These loudspeakers have not been evaluated for safety requirements using other mounting kits.
Renkus-Heinz is not responsible for the quality or effectiveness of an installer’s mounting of this heavy load to the wall type encountered during
installation.
Hardware Required
Models IC8-RN, IC16-8-RN & IC16-RN
Eight – Size M6, or 1/4 in. fasteners suitable for mounting a heavy load to the desired wall
One – Renkus-Heinz, Hinge Kit Model HK-IC8R &16R
Models IC24-16-RN, IC24-RN, IC32-24-RN & IC-32-RN
Twelve – Fasteners suitable for mounting a heavy load to the desired wall
One – Renkus-Heinz, Hinge Kit Model HK-IC24R &3 2R
Tools Required
–
Drill and bits suitable for use on the desired wall type
–
Socket Driver
–
12 mm or 7/16 in. socket
–
Phillips #2 screwdriver or socket driver
IMPORTANT WALL MOUNTING INSTRUCTIONS
WARNING: THIS APPARATUS MUST BE SECURELY ATTACHED TO THE WALL IN ACCORDANCE WITH INSTALLATION INSTRUCTIONS.
FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS MAY RESULT IN INJURY.
